Collar Type Elevators A Series

Showing 1–50 of 192 results

Sort by:

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 172

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 68

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 102

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 65

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 93

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 108

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 83

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 61

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 57

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 56

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 133

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 75

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 65

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 73

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 62

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 55

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 49

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 66

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 65

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 55

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 99

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 51

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 53

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 96

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 115

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 84

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 54

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 56

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 94

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 76

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 66

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 52

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 67

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 52

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 57

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 128

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 54

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 78

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 60

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 57

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 92

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 52

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 97

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 53

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 166

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 62

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 79

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 96

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 53

COLLAR TYPE...

Vendor: Block 4 Direct
Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All “A” type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All “A” type elevators … Continue reading COLLAR TYPE...
viewed: 95