JET-LUBE C-PLATE is specifically designed to aid in the break-in process of freshly-cut threads where platings or coatings are not available, nor desired due to the occupational or environmental hazards of those chemicals. It can also be used in conjunction with plated surfaces for additional protection. C-PLATE has low VOC’s, as exempted ketones are used as the diluent solvents.

BENEFITS of C-PLATE

• Aids in the break-in process of freshly-cut threads
• Low VOC’s
• Air-cures at room temperature in 4 to 6 hours
• Forms a durable, acid-free, corrosion-resistant finish
• Contains no ozone-depleting substances
• Fast evaporating
• Prevents galling during break-in process
• Greaseless, solid-film protective coating
• Acid-free film

C-PLATE provides a durable micro-thin coating of copper to machined surfaces, aiding in preventing galling during the break-in process. The micro-sized copper flakes adhere to the steel, utilizing a high-tech resin that air-cures at room temperature in 4 to 6 hours. With the addition of heat, an even stronger, more durable bond may be achieved. Once cured, C-PLATE forms a durable, acidfree, corrosion-resistant finish which may then be burnished into the steel surface during the intial work hardening of the threaded connection. The thin copper coating provides a dissimilar metal which acts to prohibit the metalto- metal contact under bearing loads which may cause galling damage to threaded connections.

Applications

For use on fresh-cut threads, flanges, screws, bolts, bushings, studs, and drill collar and drill pipe connections. Surfaces should be clean and oil-free for best results.

Not recommended for aluminum or its alloys or with oxygen service.

Service Rating
0°F to 300°F
-18°C to 150°C